The BackOFF™ Brake Light Module automatically flashes your brake light(s) to capture the attention of following drivers and to make your motorcycle more visible. When installed, the motorcycle's brake light becomes significantly more noticeable because your brake light(s) modulates three short flashes followed by one steady-on pulse for four seconds. This pattern automatically repeats itself as long as the brakes are applied.
Note: This module will not work with LED brake lights. The BackOFF™ XP Brake Light Module with work with both standard incandescent and LED brake lights.
When you apply your brakes, it causes your brake light to automatically emit a visual alerting signal of 3 short light flashes, followed by 1 steady on light for 2 seconds. This signal automatically repeats itself as long as the brakes are applied. This pattern is not random, but has been selected because of its ability to gain and retain following driver's attention. Most states drivers handbooks recommend that you flash your brakes when slowing or stopping. The BackOFF™ automatically facilitates compliance and enhances safety. Install the BackOFF™ and see how much more effective your brake light can be.
To install, wire the BackOFF™ Brake Light Module in-line with your existing brake light wire. Locate your brake light wire and cut the wire into 2 (use a test light or multi-meter to find proper wire). Connect the red wire from the BackOFF™ Brake Light Module to the cut wire end leading toward the front of the motorcycle. Next connect the white wire with the red stripe to the cut wire leading toward the rear of the bike. Finally peel the paper lining off of the double sided adhesive pad and mount the module to a clean, flat surface.
Solder connections or use crimp connectors (not included)
Red Wire: Brake Light Wire Leading toward front of Bike
White Wire with Red Stripe: Brake Light Wire Leading toward Bulb
Part Number: 01001
Weight: Less than 1lb
Amp Limit: 10 Amp Max (up to 3 Standard Incandescent Bulbs)
System Requirement: 12VDC(-)
Attachment Method: Included Double Sided Adhesive Pad
Height (in): 5/8"
Length (in): 2 1/4"
Width (in): 1 5/8"
Wire Length: 5"-6"
Material: Anodized Aluminum Case with Heat and Water Resistant Potting
Wire: 16AWG - 20AWG
Package Contents: (1) BackOFF™ Brake Light Module, (1) Adhesive Mounting Pad
Color / Finish: Black Anodized
Hardware Included: No
Connectors Included: No
Tools Required: Wire Cutters/Splices
Water Resistant: Yes
Heat and Vibration Resistant: Yes
Companion Product(s): n/a
Signal Dynamics Corporation warranties this product at time of purchase to be free from defects in material and workmanship to the original purchaser. Signal Dynamics Corporation's obligation under the warranty is limited to repairing or exchanging the unit if the unit is returned with the postage prepaid to Signal Dynamics Corp. within 1 year from the date of purchase. The warranty is void if the unit has been incorrectly installed, damaged, or tampered with. This warranty specifically limits Signal Dynamics Corporation's liability to unit replacement only and specifically excludes any consequential damage arising from use proper or improper or failure to properly function. A copy of your purchase receipt or other proof of purchase is required when applying for warranty consideration. See full Warranty and Return Policy!
Showing reviews 1-10 of 13 | Next
Posted by Unknown on 10th Sep 2016
this is the fourth one of these I have purchased for four different bikes
couldn't ask for a better way for those dumb ass car drivers to see us
have used all models and all work great and are easy to install
Posted by Mountain Fiddler on 18th Jul 2016
This product has performed excellent on 3 of my motorcycles. Excellent SAFETY investment.
Posted by William HArdage on 29th Oct 2015
Would not ride without one. Being Rear-ended accidents are the most threatening aspect of motorcycle riding. I am using the
Posted by Unknown on 1st Jun 2015
This is my third backoff. I had gotten one for myself about a year ago. Loved it, very easy to install, no worry about someone rear ending me with that flashing light. I've had a few car stop quickly after see the flashing tail light. Both of my sons have vintage Honda( '77' CB750, '77' GL1000). Got one for each of their bikes. It gives a father a little peace of mine. Thanks
Posted by Larry Francis on 27th Feb 2015
I have used this unit on motorcycles, cars and trucks with great success. It has never failed me and never had to be replaced.
Posted by DOC on 21st Jul 2014
got it fast, installed it in 10-15 minutes and it works just like it is suppose to !
Posted by Unknown on 2nd Jul 2014
Easy to install,directions were good, added spade connectors. for easy removal / replacement if needed.
Posted by mooser5280 on 1st Jun 2014
The Back-off module does exactly what it's supposed to do ... help protect you from a rear end collision. The five minute installation could not be any easier. I used to have to pump my brakes manually when someone was too close for comfort but now I can focus on stopping and not on watching my butt.
Thanks you Signal Dynamics
Posted by Jim S on 13th May 2014
This product was very easy to install and it works as advertised. This is the second one that I have purchased, and I would now consider this a must have for any street-going motorcycles that I acquire in the future.
Posted by WILDCARD SOUTH FLORIDA on 5th Mar 2014
ON MY GL 1800 WING ITS INSTALLED UNDER THE SEAT INTO THE
BREAK LIGHT FLASHER .... NOT IN THE TRUNK THIS IS A SIMPLE INSTALL NO WIRES TO ADD NO TIGHT SPACES IN TRUNK TOURPACK
AND IT FLASHES ALL REAR BREAK LIGHTS ... NOT JUST 2 LIKE TRUNK HOOKUP ... SAFE TIME SAFE TROUBLE DO IT THIS WAY
Showing reviews 1-10 of 13 | Next