This 15" Universal Light Bar is useful for a variety of different applications including: Motorcycles, ATVs, Trailers, Campers, Trucks, Cars, Scooters, etc. Since it was designed for all weather operation, this ULB (Universal Light Bar) should surpass all or your expectations and has been manufactured to outlive any application it is installed on. By sealing the electronic components, we have given the ULB the capability to be a water resistant auxiliary light allowing endless possibilities for even the most extreme weather conditions and applications.
Installation and Wiring
To mount, place your LED ULB light bar in the area you would like it to be permanately mounted. Once you're sure of the placement, drill 2 mounting holes and one wire hole with care and then feed the wires through the center hole and attach the ULB. To wire the ULB tap the white wire to a ground source. Locate your brake light wire and tap the green wire from the ULB to the brake light wire. Finally tap the brown wire onto your running light wire. Be sure that the ULB is secure and all of your connections are secure, now you can power up your ignition and check the functionality!
White Wire: Ground
Green Wire: Brake Light (all 11 LEDs light up as brake)
Brown Wire: Running Light (center and 2 ends light up as running)
Part Number: 03015
Weight: Less than 1lb
System Requirement: 12VDC
Height (in): 3/4"
Length (in): 15.5"
Width (in): 1 5/8"
Wire Length: 22"-24"
Power Draw: 250ma
LED Color: Red
Lens Color: Red
Hardware Included: No
Connectors Included: No
Tools Required: Wire Cutters, Crimp Connectors; Optional Test Light, Soldering Iron
Water Resistant: Yes
Heat and Vibration Resistant: Yes
Companion Product(s): n/a
Posted by Lalo on 9th Sep 2016
Refurbished my 14 year old flatbed utility trailer. Added new LED lights and needed to replace old rear bar light. There is a small shroud that goes over top and around lights. So the new bar had to fit in that space. The SD light was perfect. Installed in about 30 min. Looks great on back. My gf was following me to make a pick up and said the lights really lit up the back end,
Love these lights.
Doesn't come with mounting screws so get those before you start your project.
Posted by Unknown on 26th Aug 2014
Nice bright light works great under under the trunk of my Venture. Just make some clips to attach to the helmet holders easy to hook up. sealed unit