Black License Plate Frame with a RED LED light bar that features AMBER outer LEDs to function as additional turn signals! Simple installation with easy to follow instructions.
This dual intensity LED License Plate Frame has been designed to give greater visibility and conspicuity to your motorcycle. It has been engineered to function in both high and low intensity brightness for a multitude of applications. Because many motorcycles have only one brake/running light bulb, these units can easily be used as back-up brake, and running lights, providing you a greater degree of safety and added visibility. Additionally, this model features 3 amber LEDs on both sides of the light bars that function as auxiliary turning signals! Mount and install this beautifully crafted license plate frame and give your bike an excellent finished appearance compared to an otherwise obtrusive license plate.
This frame has a black powder coating and features a 6" dual intensity red LED light bar with 18 LEDs (12 red LEDs and 6 amber LEDs total) and are enclosed by clear 'euro style' lens.
To install, nest your license plate into your license plate frame, continue by checking to see that the 4 mounting holes all align correctly. The use of a round metal file may be necessary to ensure alignment prior to installation, if adjustment with a file is necessary minimal filing is required. It is recommended during installation not to pinch the wires against the sharp edge of your license plate, as this can cause the wire(s) to shred from vibration causing the LED light bar to lose functionality. Some license plates may need to be 'notched' for the wires to remain undamaged. This LED license plate frame has 5 wires in total. To ensure proper orientation, mount the license plate frame with the light bar on top and follow the wire color code below. If you choose to mount the plate with the LED light bar on the bottom, reverse the wire colors and connect the purple wire to your right turn signal and connect brown to your left turn signal.
Red Wire: Brake Light Wire
White Wire: Running Light Wire
Black Wire: Ground Wire
Purple Wire: Left Turn Signal (test with 12V source to verify orientation)
Brown Wire: Right Turn Signal (test with 12V source to verify orientation)
Part Number: 02603
Attachment Method: Screws
Height (in): 4 1/4"
Length (in): 7 3/16"
Width (in): 1/2"
Material: Finished Zinc
Package Contents: (1) LED License Plate Frame
Color / Finish: Black Gloss Powder Coat Finish
Hardware Included: No
Connectors Included: No
Tools Required: Wire Cutters/Splices
Water Resistant: Yes
Heat and Vibration proof: Yes
Companion Product(s): Black Flat Head Mounting Hardware
Signal Dynamics Corporation warranties this product at time of purchase to be free from defects in material and workmanship to the original purchaser. Signal Dynamics Corporation's obligation under the warranty is limited to repairing or exchanging the unit if the unit is returned with the postage prepaid to Signal Dynamics Corp. within 1 year from the date of purchase. The warranty is void if the unit has been incorrectly installed, damaged, or tampered with. This warranty specifically limits Signal Dynamics Corporation's liability to unit replacement only and specifically excludes any consequential damage arising from use proper or improper or failure to properly function. A copy of your purchase receipt or other proof of purchase is required when applying for warranty consideration. See full Warranty and Return Policy!