Includes 2 Ultra Bright LED Bullet lights 2 bolts with lock washers for mounting. 28 Dual Intensity, Ultra Bright LEDs Can be operated in low or high intensity brightness. Bullets can be used as brakes, running lights and/or turn signals.
Installation & Wiring
Bullet Lights can be used as turn signals and running lights. Most commonly installed onto fork clamps(sold separately) or replace handle bar mounted turn signal.. They are pre-wired with a three conductor jacketed wire (violet,blue,black). These lights are manufactured to meet DOT specifications for motorcycle turn signal lighting.
When mounting, Be sure to face the small 'weephole' pointing downward to allow proper drainage of any moisture; The bullet lights have the 'weephole' on the bottom of the bullet, so proper orientation is key.
Violet – High Intensity (Brake Light)
Blue – Low Intensity (Running Light)
Black – Ground
Note: When Installing our White LED Bullet lights ( PN: 2404 / 2415 / 2424 / 2425 ) as driving lights on the front of your motorcycle, you may not need to utilize the dual intensity function. To achieve greater visibility by adding additional driving lights, use of the Blue (Low Intensity) Wire is not necessary.
Part Number: 02400
Number of Products: 2 Bullet Lights (One Pair)
System Requirement: 12VDC
Attachment Method: Included Mounting Hardware
Diameter (in): 2.25"
Length (in): 3.33"
Wire Length: 32"-36"
Power Draw: 250ma
LED Color: Red
Lens Color: Clear 'Euro'
Material: Finished Zinc
Package Contents: (2) 5/16" Stainless Steel Mounting Bolts and Lock Washers
Color / Finish: Marine Grade Chrome Plating
Hardware Included: Yes
Connectors Included: No
Tools Required: Wire Cutters, Crimp Connectors; Optional Test Light, Soldering Iron
Water Resistant: Yes
Heat and Vibration Resistant: Yes
Companion Product(s): n/a
Signal Dynamics Corporation warranties this product at time of purchase to be free from defects in material and workmanship to the original purchaser. Signal Dynamics Corporation's obligation under the warranty is limited to repairing or exchanging the unit if the unit is returned with the postage prepaid to Signal Dynamics Corp. within 1 year from the date of purchase. The warranty is void if the unit has been incorrectly installed, damaged, or tampered with. This warranty specifically limits Signal Dynamics Corporation's liability to unit replacement only and specifically excludes any consequential damage arising from use proper or improper or failure to properly function. A copy of your purchase receipt or other proof of purchase is required when applying for warranty consideration. See full Warranty and Return Policy!