- Engineered for the custom builder, or to retrofit motorcycles not
equipped with self-canceling turn signals.
- Designed for use with individual momentary type turn signal switches
mounted on the left and right handle bars. This unit will not work
on bikes that have the left and right turn signal switch built into one unit that you must
push to cancel.
Features:
- Three Turn Signal Timing Modes -
self canceling.+ Hazard Mode -
non-self canceling.
- Non-Load Dependent Flash Duration -
flash time constant whether using
incandescent or LED lighting.
- Dependable Solid-state electronic components.
- Weather Proof - potted with soft cell technology to prevent wire chaffing and damage.
Specification:
- Voltage: 12 VDC, Negative Ground.
- Max Load Capacity: 6 amps per left or right channel.
- Dimension: 2 1/4” L x 1 5/8” W x 5/8” H
- Mounting: Secure to flat surface with double sided VHB tape
(included).
Four Unique Turn Signal Modes of Operation
Mode 1 : Press turn signal
button for 1 second, turn signal lights will flash for 7 seconds, then self cancel. This
mode is usually used when changing lanes.
Mode 2 : Press turn signal button for 2 seconds, turn signal
lights will flash for 20 seconds, then self cancel. This mode is usually used when slowing
down to go around a corner.
Mode 3 : Press turn signal button for 4 seconds, turn signal
lights will flash for 75 seconds, then self cancel. This mode is usually used when
stopping at a signal light and turn will be made after stopping.
Note: All three modes above can be cancelled by pressing the same turn signal button a
second time.
Mode 4 : Hazard Mode - is available all the time and will
flash until cancelled. To engage, depress both the left and right turn signal buttons for
1 second. To cancel, depress both buttons again for one second. |
