TRI-STAR
XP:
The
Tri-Star XP module converts
the rear turn signal lights to function as brake and turn signal lights...and
now has Running Light Capabilities!
When the brakes are applied, the turn signal lights illuminate. If a turn
signal is applied, it has priority over the brake light function on the
side that is selected. If the turn signal is canceled and the brakes are
still applied, the brake light function of the turn signal lights
illuminate steady on.
NOTE:
If your bike does not have a variable load turn signal flasher, a Dual
Load Equalizer will be needed for this installation.
Tri-Star XP Features:
- Adds brake light function to existing turn signals
- Dependable Solid-state electronic components.
- Weather Proof - potted with soft cell technology to prevent
wire chaffing and damage.
Tri-Star XP Specifications:
- Voltage: 12 VDC Switched
Negative Ground.
- Max Load Capacity: 6 amps per left or right
channel.
- Dimension: 2 1/4” L x 1 5/8” W x 5/8”
H
- Mounting: Secure to flat surface with double
sided VHB tape (included).
Function Check
Applying the brakes will cause the rear Turn Signals to light as long as the brakes are held. If a turn signal is sent to the rear lights at the same time it will have priority over the brake lights and cause the corresponding light to flash. When the turn signal is canceled the brake light will resume.
DUAL LOAD
EQUALIZER:
This Dual-Load Equalizer is designed to fix the
problem when you have changed your stock directionals to L.E.D. turn signals
and they flash quickly or not at all.
NOTE:
The security key light will still be lit on late model
Harley-Davidsons equipped with the factory security system even with this
Dual-Load Equalizer installed. However, the security system is still
fully functional and cannot be damaged in any way.
NOTE:
If your bike does not have a variable load turn signal flasher, a Dual
Load Equalizer will be needed for this installation.
Dual-Load Equalizers Features:
- Dependable Solid-state electronic components.
- Weather Proof - potted
with soft cell technology to prevent wire chaffing and damage.
Dual-Load Equalizer Specifications:
- Dimension: 2 1/4” L x 1 5/8” W x 5/8”
H
- Mounting: It is recommended that the module
be mounted in a location not subject to extreme heat conditions.
- Secure to flat surface with double sided VHB
tape.
|
