|
Early Warning System!
You want to know what's up with your electrical system? Well this
product gives you a "heads-up", hence its name: The Heads-Up
Voltage Monitor™. Your electrical system is the heart of your motorcycle…when
it's not working, you may be walking!
The heart of The Heads-Up Voltage Monitor™ is a micro-processor
that monitors the output of the charging system and is accurate to within
200 milli-volts. The Heads-Up Voltage Monitor's™ onboard microprocessor
performs a self-test each time voltage is applied. The single, multi-color
LED (red-amber-green) visually indicates the state of your motorcycle's
battery / charging system. At a glance, you will instantly know whether
the voltage is normal or abnormal. Additionally, you will be notified of
serious fault conditions by an attention-getting flash of the LED (see
voltage table on product photo).
With the "Heads-up Voltage Monitor™" installed, at a
glance you will know your systems voltage condition … and what it is
doing now!
NO RISK GUARANTEE!
Try The Heads-Up Voltage Monitor™ RISK FREE for 30-Days! If you
are not completely satisfied, Signal Dynamics will give you a 100%
refund.**
** Refund for The Heads-Up Voltage Monitor™ will only be issued upon
return of The Heads-Up Voltage Monitor™ product to Signal Dynamics
Corporation.
Features:
- Instant Visual Recognition
- Single LED Visual Indicator
- Precision
Microprocessor Monitoring
- Automatic
Self-Test
- Auto-dimming - reducing
LED night-time glare
- Easy installation
- can be mounted virtually anywhere.
Specification:
- Voltage Range: 6 to 17 VDC,
- Accuracy: within 200 millivolts.
- Amp Draw: 20–85 milli-amps.
- Dimension: 2 1/4” L x 1 5/8” W x 5/8” H
- Voltage sampling: 50,000 times per second.
Serious Fault Detection &
Notification
Flashing Green - Voltage Above 15.25 VDC – This prolonged over-voltage condition can destroy batteries, especially
gel-cells.
Steady Green - Above
12.9
Steady Amber -
Above 12.6
Steady Red - Above
12.1
Flashing Red - Below 12 VDC – During this condition, if the engine is running, do not shut down until service can be provided. Restart of engine is unlikely. Reduce electrical
load.
Available Models- for use with 12-volt electrical systems**:
PN 1050: Single Voltage Indicator, Flush Panel Mount LED.
PN 1053: Dual Voltage Indicators, Flush Panel Mount LED’s.
PN 1055: Dual Voltage Indicators, Black Case Mount LED’s.
**Note: Dual Voltage Indicators monitor two separate charging/battery systems, usually found on twin-engine boats.
|
