Loading... Please wait...
  • Image 1

Dual Load Equalizer Module

$21.95
SKU:
01008
Rating:
5 Stars
Quantity:

Product Description

instructions-button-red-wrench.png

The Dual Load Equalizer Module is designed to correct the issue of turn signals flashing too quickly or not at all. It does this by adding back the load to your mechanical flasher relay that was removed by converting stock incandescent turn signals to LED’s. LED's don't have as much resistance as regular incandescent bulbs and this is caused by a much lower power draw. Resistance is what causes the turn signal to work correctly. Too little a load, and the blinker won't function fast enough...too much load and it will blink too quickly. What the dual load equalizer does is place an artificial load on the circuit so the original blinker will work correctly and at the right speed. 

Features
• Universal application for most makes and models of motorcycles
• Equalizer will stablize 1 pair of turn signals*
• Compatibile with alarms on most motorcycles equipped with alarm systems*
• Potted with a heat resistant epoxy in an aluminum case
• Waterproof potting prevents water damage to electrical components
• Simple 2 wire tap-in installation (2 tap splice connectors included!)

Please Note:
1.) *The security key light will still be lit on late model Harley-Davidsons equipped with the factory security system even with this Dual-Load Equalizer installed. However, the security system is still fully functional and will not be damaged in any way.
2.) *This module is only meant for ONE PAIR (2) of turn signals. If you plan to equalize your front AND rear signals, this will require (2) Dual Load Equalizers.
3.) Hazard flashers can be used for up to 1 hour continuously. (Using hazards for extended periods of time causes heat buildup inside the module, which will not cause any damage to your motorcycle but may damage the components inside)

Mounting and Installation
To install, simply tap the brown wire onto your right turn signal output wire and tap the violet wire onto your left turn signal output wire. Connect the black wire to a ground source and mount the Dual Load Equalizer. It is recommended that the module be mounted in a location not subject to extreme heat conditions. We highly recommend mounting on a flat area of your frame away from any plastic, wiring, or exposed cloth. Secure with the included double sided adhesive pad. 

Specifications
Part Number: 01008
Weight: Less than 1lb
Correction Limit: 2 Turn Signals
System Requirement: N/A
Attachment Method: Included Double Sided Adhesive Pad
Height (in): 5/8"
Length (in): 2 1/4"
Width (in): 1 5/8"
Wire Length: 5"-6"
Material: Anodized Aluminum Case with Heat and Water Resistant Potting
Wire: 16AWG - 20AWG
Package Contents: (1) Dual Load Equalizer Module, (1) Adhesive Mounting Pad, (3) Tap Connectors
Color / Finish: Black Anodized
Hardware Included: No
Connectors Included: Yes (3)
Tools Required: Wire Cutters, crimp connectors; optional test light, soldering iron
Waterproof: No
Water Resistant: Yes
Heat and Vibration Resistant: Yes
Companion Product(s): n/a

Warranty Information

Signal Dynamics Corporation warranties this product at time of purchase to be free from defects in material and workmanship to the original purchaser. Signal Dynamics Corporation's obligation under the warranty is limited to repairing or exchanging the unit if the unit is returned with the postage prepaid to Signal Dynamics Corp. within 1 year from the date of purchase. The warranty is void if the unit has been incorrectly installed, damaged, or tampered with. This warranty specifically limits Signal Dynamics Corporation's liability to unit replacement only and specifically excludes any consequential damage arising from use proper or improper or failure to properly function. A copy of your purchase receipt or other proof of purchase is required when applying for warranty consideration.

Product Reviews

Write your own product review

  1. 3 easy connections and DONE 5 Star Review

    Posted by on 15th Jul 2019

    The hardest thing about installing this product is deciding where to mount it. I simply made the three easy connections - one to each light and the third to ground - and VOILA... problem solved. I recommend this product to anyone who has the issue of fast blinking when switching from incandescent to LED lights.


  2. Worked Great 5 Star Review

    Posted by on 6th Mar 2014

    What can I say it is a load equalizer and it works, company is very helpful and responsive.