Sorry but this item is currently unavailable.
Please check back at a later stage.
The AYN AUTOMOTIVE is All You Need for your Car/Truck/SUV!
AYN stands for all you need, because this license plate frame and smart module combination pack will give you just that! To start we designed a custom forged zinc frame that has a super durable black powder coat finish. Adding to the superior quality of our frame, 30 ultra bright LED’s with running light and brake light capability built in! To really make this frame ALL YOU NEED we gave it functionality including brake and running lights. When wired in with the AYN smart module you will have sequential turn signals, ‘night rider’ mode for shows and hazard flashers for emergencies. And to top it off, we added our patented BackOFF technology giving you the option to choose from 4 different brake flash patterns. The “AYN” License Plate Frame is… All You Need for your automobile! We GUARANTEE these LEDs to be the brightest lights you've ever seen, if you don't agree we will take it back hassle free and reimburse your shipping costs! (You'll see, and you will agree... They're the brightest LEDs you've probably ever seen, you may even need sunglasses!)
The AYN License Plate Frame Features
The “AYN Smart Module” Adds the Following Functions
How to Engage Different Functions
|HAZARD MODE - Turn your right turn signal on, apply your hand or foot brakes and turn your key switch off. When the hazard mode is turned on this way it will continue to flash until your motorcycle is turned back on. This mode will not work while your motorcycle is on for safety reasons.|
|TURN SIGNALS - The frame will give you additional turn signals that sequence from the center and outward for increased visibility while changing lanes or waiting to turn.|
How to Engage Different Brake Light Modes
The default mode that your AYN frame has is MODE A. If you would like to switch to any of the 4 braking flash patterns, simply press your hand or foot brakes the amount of times listed below ( 6x, 9x, 12x or 15x) immediately after you turn on your motorcycle. You will need to wait 10 seconds for the mode you've chosen to take effect.
Mode A - (Default)1 second rapid WIG WAG (back-forth on either side) then our patented BackOFF sequence (Three slow flashes - Steady for one second - Repeat).To engage: Press your hand or foot brake 6x immediately after you turn on your motorcycle. You will need to wait 10 seconds for this mode to take effect.
Mode B - 1 second rapid WIG WAG (back-forth on either side) then your brakes will remain steady on as long as you are stopped. To engage: Press your hand or foot brake 9x immediately after you turn on your motorcycle. You will need to wait 10 seconds for this mode to take effect.
Mode C - Steady on brakes (NO flashing) - This mode will most commonly be needed in the event that your state has a mandatory annual vehicle inspection or during group rides. To engage: Press your hand or foot brake 12x immediately after you turn on your motorcycle. You will need to wait 10 seconds for this mode to take effect.
Mode D - Continuous rapid WIG WAG (back-forth on either side) as long as you are stopped. To engage: Press your hand or foot brake 15x immediately after you turn on your motorcycle. You will need to wait 10 seconds for this mode to take effect.
To install, nest your license plate into your license plate frame. The use of a round metal file may be necessary to ensure alignment prior to installation, if adjustment with a file is necessary minimal filing is required. It is recommended during installation not to pinch the wires against the sharp edge of your license plate, as this can cause the wire(s) to shred from vibration causing the LED light bar to lose functionality. Some license plates may need to be 'notched' for the wires to remain undamaged. The LED license plate frame has 3 wires in total. To ensure proper orientation, mount the license plate frame with the light bar on top and follow the wire color code below. If you choose to mount the plate with the LED light bar on the bottom, reverse the wire colors and connect the purple wire to your right turn signal and connect brown to your left turn signal.
Black Wire: Ground Wire
Yellow Wire: Connect Yellow Wires from Frame and Module together
Orange Wire: Connect Orange Wires from Frame and Module together and to a 12VDC Fused Power Source
Red Wire: Brake Light Wire
Blue Wire: Switched 12V Power Source (Running Light)
Purple Wire: Left Turn Signal (test with 12V source to verify orientation)
Brown Wire: Right Turn Signal (test with 12V source to verify orientation)
White Wire: (Optional) Hazard Mode - Switch and fuse needed (sold separately)
Green Wire: (Optional) Night Rider Mode - Switch and fuse needed (sold separately)
Part Number: 02724
Attachment Method: Standard License Plate Bolts (Not Included)
Height (in): 6 1/2"
Length (in): 12"
Width (in): 3/8"
Hole Spacing: 7" (center to center / 2 mounting holes)
Material: Finished Zinc
Package Contents: (1) AYN AUTOMOTIVE License Plate Frame, (1) AYN Smart Module
Color / Finish: Black Powder Coating
Hardware Included: Yes
Connectors Included: No
Tools Required: Wire Cutters/Splices
Water Resistant: Yes
Heat and Vibration proof: Yes
Companion Product(s): n/a
Note: The brake input wire on the smart module must be connected to a brake only source. It can not be connected to a power source that is a combination brake and turn signal. If you have one bulb that functions as a brake and turn signal, you will need to run the brake input wire to the center brake light on the vehicle.
Note: The turn signal input wires on the smart module must be connected to a turn signal only source. It can not be connected to a power source that is a combination brake and turn signal. If you have one bulb that functions as a brake and turn signal, you will need to run the turn signal input wires to the turn signals located on the front of the automobile that do not have brake function.
Note: The AYN Frame and Smart Module consume a small amount of power when the key switch off. The amount of power consumed is comparable to that of your radio presets or less than your security system. If the bike is not going to be in use for an extended period of time (roughly 4-6 weeks) it is recommended to connect it to a battery charger.
Note: When bench testing the AYN Frame, apply orange wire to positive 12V source and black to ground. To test the brake light, apply the yellow wire from the AYN frame to a negative ground source and remove it - the AYN frame yellow wire is actually looking for an absence of ground to activate the brake light.
Signal Dynamics Corporation warranties this product at time of purchase to be free from defects in material and workmanship to the original purchaser. Signal Dynamics Corporation's obligation under the warranty is limited to repairing or exchanging the unit if the unit is returned with the postage prepaid to Signal Dynamics Corp. within 1 year from the date of purchase. The warranty is void if the unit has been incorrectly installed, damaged, or tampered with. This warranty specifically limits Signal Dynamics Corporation's liability to unit replacement only and specifically excludes any consequential damage arising from use proper or improper or failure to properly function. A copy of your purchase receipt or other proof of purchase is required when applying for warranty consideration. See full Warranty and Return Policy!